top of page

Control panels for 2, 3 or 4 residual pumps up to 45 kW.

Residual Pumps Control Panels

    • Power supply 3-400V 50Hz. 60Hz.
    • Power supply relay in 0.37 to 4 kW panels.
    • Micro-automaton 16 inputs / 10 outputs for panels from 5 to 45 kW.
    • Soft starter with pump for panels from 5 to 45 kW.
    • Externally operated general cut-off switch.
    • General magneto-thermal and differential (300mA) switches.
    • Magnetothermic switch per pump.
    • Ammeter per pump visible from the outside.
    • Voltmeter with phase selector visible from the outside.
    • Operating hours counter visible from the outside.
    • “Manual-Stop-Automatic” Selectors.
    • Pilots who detect:
        • Presence of voltage
        • Pump operation
        • General Judgment
    • Acoustic alarm.
    • Take inner Schuko.
    • IP65 protection electrical cabinet made up of self-supporting metal modules.
    • Boards designed for use with switches and level probes.

    On request:

    • GSM communication for remote control and monitoring of parameters.
    • For power ratings from 0.37 to 4 kW. In the case of an alternating relay, a circular permutation is possible (cascade pump operation).
    • For power ratings from 5 to 45 kW. a micro-automaton manages the circular permutation of the pumps, allowing the user to select the following operating modes:
      • 1+1 mode : 2 pumps running in rotation
      • Mode 2 : 2 pumps running in rotation and married.
      • Mode 3 : 3 pumps running in rotation, maximum 2 in cascade.
      • 3+1 mode : 4 pumps running in rotation, maximum 3 in cascade.
      • Mode 4 : 4 pumps running in rotation and cascade.
bottom of page